Answer | By default, the SVG2482AC operates as a gateway, and provides Internet access for multiple devices (up to 253 devices), connecting to the SVG2482AC.  The SVG2482AC functions as a cable modem and wireless router keeping the devices in the home network hidden from the Internet.  In certain situations, it may be desired to disable the router function of the SVG2482AC, and have it operate as a modem only. This can be accomplished by configuring the SVG2482AC for Bridge Mode. When Bridge Mode is enabled, the firewalll, router and wireless functions are disabled.  Only one device directly connected to the SVG2482AC will have Internet access.  This document contains the following sections:
This is an ideal setup when:
- Adding a firewall, router or another NAT device to manage the home network
- Hosting services or applications that can benefit from being directly accessible from the Internet
To Enable Bridge Mode
- Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://10.0.0.1 into the address box, and press the Enter key. The Login page will appear.
 - On the Login page, enter admin in the Username field.
 - Enter password in the Password field then click the Login button.  The Gateway > At a Glance page will appear.
NOTE: A prompt to change the password appears when the SVG2482AC is using the default password. To change the password click the OK button or click the Cancel button to bypass it.
 - On the Gateway > At a Glance page, click the Enable button for the Bridge Mode field.   The Warning pop-up window will appear.Â
 - On the Warning pop-up window, click the OK button to enable bridge mode.  Â
 - Allow 90 seconds for the SVG2482AC to reboot for changes to take effect.  Then connect a device to the SVG2482AC Ethernet port for Internet access.
To Disable Bridge Mode
- Connect a device via Ethernet cable to the Ethernet port of the SVG2482AC.
 - Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://10.0.0.1 into the address box, and press the Enter key. The Login page will appear.
 - On the Login page, enter admin in the Username field.
 - Enter password in the Password field then click the Login button.  The Gateway > At a Glance page will appear.
NOTE: A prompt to change the password appears when the SVG2482AC is using the default password. To change the password click the OK button or click the Cancel button to bypass it.
 - On the Gateway > At a Glance page, click the Disable button for the Bridge Mode field.Â
 - Allow 90 seconds for the SVG2482AC to reboot for changes to take effect.
 |
|
|---|
