Consumers - SBR-AC3200P: SIP Passthrough Setup
FAQs

ARRIS Consumer Care

Article

SBR-AC3200P: SIP Passthrough Setup

« Go Back

Information

 
Question
How do I setup SIP Passthrough in my SBR-AC3200P?
Answer
When using a VoIP phone with the SBR-AC3200P, the SIP Passthrough option in the SBR-AC3200P may need to be enabled in order for that phone to have full functionality.  In other situations, it may be recommended by the VoIP phone manufacturer to disable SIP Passthrough.  By default, SIP Passthrough is enabled.  This document describes how to enable SIP Passthrough in the SBR-AC3200P.

NOTE: If it is not known if SIP Passthrough should be enabled or disabled, please contact the VoIP phone manufacturer.
 

To Enable SIP Passthrough
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page will appear.
     
  2. On the Login page, enter admin in the Username field.
     
  3. Enter password in the Password field.
     
  4. Click the Login button.  The Home page will appear.

     User-added image

     
  5. Move the mouse-cursor over Advanced on the main menu and click the Options link on the sub-menu.  The Advanced - Options page will appear.

    User-added image
     
  6. On the Advanced Options page, under the NAT ALG Status section for SIP - Check Enable.
     
  7. Click the Apply button.

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->