Consumers - SBR-AC1900P: Quick Start Wizard
FAQs

ARRIS Consumer Care

Article

SBR-AC1900P: Quick Start Wizard

« Go Back

Information

 
Question
How do I configure my wireless network using the Quick Start Wizard? 
Answer
The SBR-AC1900P Quick Start Wizard is an application that allows the user to customize the default Wi-Fi and admin login credentials.  This document describes how to customize the Wi-Fi name and security key, and admin login username and password using the Quick Start Wizard in the SBR-AC1900P.
 
Quick Start Wizard
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page will appear.
     
  2. On the Login page, enter admin in the Username field.
     
  3. Enter password in the Password field.
     
  4. Click the Login button. The Home page will appear.

    User-added image
     
  5. On the Home page, click on Launch Quick Start Wizard.  The Quick Start Wizard begins.

    User-added image
     
  6. Click the Next button on Welcome page.​​

    User-added image
     
  7. Leave the box unchecked for Disable Band Steering then click the Next button on the Band Steering page.  Band Steering allows the SBR-AC1900P to automatically direct attached Wi-Fi clients to the best radio band.  ​

    User-added image
     
  8. On Wi-Fi Network Name & Passphrase page, enter a new wireless network name in the Network Name (SSID) field.  The name needs to be 1 to 32 alphanumeric characters long.
     
  9. Enter a new wireless password in the Passphrase field.  The passphrase needs to be 8 to 64 chracters long.
     
  10. Click the Next button.

    User-added image
     
  11. Review the Wi-Fi names on the 2.4 GHz & 5 GHz Network page.  Then click the Next button to proceed.  

    NOTE: Click the Previous button to modify the Wi-Fi names and password.​
     

    User-added image
     
  12. Click the Next button on the Security Configuration page.  ​

    User-added image

    NOTE: It is not required to change the admin username and password in order to change the default Wi-Fi credentials.  It is recommended to change the default admin login credentials; check the options to make changes.
     
  13. Check the Change Username box to enter a new username.
     
  14. Enter a new username in the Enter New Username field.
     
  15. Re-enter the new username in the Re-Enter New Username field.
     
  16. Check the Change Password box to change the password.
     
  17. Enter a new password in the Enter New Password field.
     
  18. Re-enter the new password in the Re-Enter New Password field.
     
  19. Click the Next button.

    NOTE: The new username and password will take effect when the Web Manager is logged out.
     

    User-added image
     
  20. Review the Wi-Fi credentials on the Review Settings page.  Then click the Apply button to save the settings.  

    NOTE: It may take up to one minute to complete. 
     

    User-added image
     
  21. On the Setting Applied page, write down the new Wi-Fi Credentials or press the Print button to save the new Wi-Fi credentials.  Click the Exit button when finish.

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->