Consumers - SBR-AC1900P: DMZ Host Setup
FAQs

ARRIS Consumer Care

Article

SBR-AC1900P: DMZ Host Setup

« Go Back

Information

 
Question
How do I setup a DMZ Host in the SBR-AC1900P? 
Answer
The DMZ Host feature allows the option to run a publicly accessible server within the home network.  This enables the SBR-AC1900P to forward all traffic to the designated DMZ Host device such as Web Server, Mail Server, Digital Video Recorder (DVR) or gaming device.  That designated DMZ Host device will operate outside of the SBR-AC1900P firewall and allow remote access from the Internet and not the home network.  This document describes how to gather the client IP address and setup DMZ Host in the SBR-AC1900P.

CAUTION: The designated DMZ Host device is not protected by the SBR-AC1900P Network Extender firewall.  It is exposed to the Internet and thus vulnerable to attacks or hacking from any computer on the Internet.  Consider carefully before configuring a device to be in the DMZ.  It is recommend to enable software firewall on that device or use a more secure method of forwarding traffic such as Port Forwarding.  Please refer to Answer # 16079 - SBR-AC1900P: Port Forwarding Setup. 

The following are examples of scenarios in which DMZ Host is useful:
  • When the port number or protocol in an in-bound application cannot be anticipated.  For example, some network games select arbitrary port numbers when a connection is opened.
  • When all unsolicited traffic needs to be forwarded to a specific device in the network.
  • When an application does not work well with port triggering or port forwarding.
​After completing the DMZ Host setup, it is recommended to reserve the IP address for the client device the port forwarding is setup for.  Please refer to Answer # 16084 - SBR-AC1900P: IP Address Reserve Setup.
 
Requirement

The client device IP Address is require to setup DMZ Host.  It can be found in the SBR-AC1900P Web Manager or from the client device's network information.​

 
DMZ Host Setup
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page will appear.
     
  2. On the Login page, enter admin in the Username field.
     
  3. Enter password in the Password field.
     
  4. Click the Login button.  The Home page will appear. ​

    User-added image

     
  5. Move the mouse-cursor over Basic on the main menu and click the DHCP link on the sub-menu.  The Basic - DHCP page will appear.

    User-added image

     
  6. On the Basic - DHCP page, locate and copy the client's IP Address under the Attached Client List section to use for DMZ Setup.​

    User-added image

     
  7. Move the mouse-cursor over Advanced on the main menu, and click the DMZ Host link on the sub-menu.  The Advanced - DMZ Host page will appear.

    User-added image

     
  8. On the Advanced - DMZ Host page, enter the IP Address of the device in the DMZ Host field.  For example: if the IP address of the server is 192.168.0.3, then enter 3.

    NOTE: Enter 0 to disable DMZ Host.

     
  9. Click the Apply button.  A restart is not required, as the settings will immediately go into effect.  

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->