SBR-AC1750: WAN Ping Blocking

How do I block ICMP pings to the SBR-AC1750?

The SBR-AC1750 can be configured not to respond to an Internet Control Message Protocol (ICMP) Ping (ping to the WAN port).  This offers a heightened level of security.  By default the SBR-AC-1750 has the block ICMP ping enabled.  This document describes how to enable ping blocking. 

Enable Ping Blocking

1. Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page appears.
   
   NOTE: By default the LAN IP address is 192.168.0.1.  If the default address has been changed, enter the custom address in the address box.
   
   
    
2. On the Login page:
   a.   Enter password in the Password field.
   b.   Click the Login button.  The Home page appears.
   
   
    
3. Move the mouse-cursor over the Firewall tab and select the WAN Ping Blocking sub-link.  The Firewall - WAN Ping Blocking page appears.
4. On the Firewall - WAN Ping Blocking page:
   a.   Enable Ping Blocking - Check mark the box.
   b.   Click the Apply button.