Consumers - SBR-AC1200P: Band Steering Setup
FAQs

ARRIS Consumer Care

Article

SBR-AC1200P: Band Steering Setup

« Go Back

Information

 
Question
How do I improve Wi-Fi performance on my SBR-AC1200P?
Answer
The SBR-AC1200P has the ability to improve Wi-Fi performance by using Band Steering.  Band Steering technology will detect if a Wi-Fi client has dual-band capabilities and will send the Wi-Fi client to the 5 GHz band if the 2.4 GHz band becomes overcrowded.  (If the 5 GHz band gets crowded, the Band Steering function can also move a 5 GHz client to the 2.4 GHz band.)  When the SBR-AC1200P sends a Wi-Fi client from the 2.4 GHz band to the 5 GHz band, the client may experience a brief Wi-Fi disconnection and reconnection.

NOTE: Band Steering requires that the Network Name (SSID), Wireless Encryption type, and Passphrase (Wireless password) match on both the 2.4 GHz and 5 GHz bands in order to function.

In some situations the Wi-Fi client may experience disconnects and reconnects depending on the location of the client device in respect to the Wireless AP.  The 2.4 GHz band does provides greater distance for the connection while the 5 GHz band provides higher speed in shorter distances for the connection.  As the 2.4 GHz and 5 GHz bands share the same Network Name (SSID), it is recommended to disable Band Steering to reduce the confusion on the Wi-Fi client.  Once Band Steering is disabled it is suggested to rename the Network Name (SSID) of the 2.4 GHz and 5 GHz bands to unique name to differentiate them.  The Wi-Fi clients will then connect to the 2.4 GHz or 5 GHz bands independently.  The Wi-Fi client will have to manually reconnect to the new SSIDs after disabling the Band Steering option.  


This document contains the following section:

Enable Band Steering         
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page will appear.
     
  2. On the Login page, enter admin in the Username field.
     
  3. Enter password in the Password field.
     
  4. Click the Login button.  The Home page will appear.

    Right click on the image to save it to your computer.

     
  5. Move the mouse-cursor over the Wireless on the main menu and click the Media link on the sub-menu.  The Wireless - Media page will appear. 

    User-added image

     
  6. On the Wireless - Media page, click the Band Steering drop-down menu and select Enabled.
     
  7. Click the OK button on the pop-up message to proceed.

    User-added image

    NOTE: When the Band Steering option is Enabled it is enabled for both the 2.4 and 5 GHz band. 
     
  8. Click the Apply button. 

    User-added image


Disable Band Steering​
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page will appear.
     
  2. On the Login page, enter admin in the Username field.
     
  3. Enter password in the Password field.
     
  4. Click the Login button.  The Home page will appear.

    Right click on the image to save it to your computer.

     
  5. Move the mouse-cursor over the Wireless on the main menu and click the Media link on the sub-menu.  The Wireless - Media page will appear. 

    User-added image

     
  6. On the Wireless - Media page, click the Band Steering drop-down menu and select Disabled.

    NOTE: When the Band Steering option is Disabled it is disabled for both the 2.4 and 5 GHz band. 
     
  7. Click the Apply button. 

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->