Consumers - SBG7580-AC: Port Forwarding Setup
FAQs

ARRIS Consumer Care

Article

SBG7580-AC: Port Forwarding Setup

« Go Back

Information

 
Question
How do I configure port forwarding in my SBG7580-AC?
Answer
Virtual Servers also known as Port Forwarding allows the option to run a publicly accessible server on the home network by specifying the mapping of TCP and/or UDP ports to a local device.  This enables incoming requests on specific port numbers to reach devices such as Web Servers, Mail Servers, Digital Video Recorders (DVR) and gaming devices.  Port forwarding is setup by selecting from predefined commonly forwarded ports or by entering specific port(s).  This document describes how to gather the client IP address and setup port forwarding by entering specific port(s) in the SBG7580-AC. 

Requirements
  • Client device IP Address
  • The port number(s) and protocol (TCP and/or UDP) of the service
After completing the Port Forwarding setup, it is recommended to reserve the IP address of the client device that was setup for port forwarding.  Please refer to Article # 16956 SBG7580-AC: IP Address Reserve Setup.


Port Forwarding Setup
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page will appear.

    NOTE: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to by-pass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
     
  2. On the Login page, enter admin in the User Name field.
     
  3. Enter password or a customized password in the Password field.

    NOTE: When using the default password to login, it may be required to set a unique password to proceed to the Web Manager.  For assistance with Web Manager Access, refer to article # 18248 – SBG7580-AC: Web Manager Access.
     
  4. Click the Apply button.  The Alert!! window will appear.

    User-added image

     
  5. The Alerts!! window includes information about the Parental Control via the Secure Home Internet Service mobile app available on the Google Play Store (Android) and App Store (iOS).
    • Check the Do not show this window again box and click the Close button to stop the alert window from appearing during the next login.
    • Click the Close button to bypass the alert window.  The alert window will appear during the next login.

      User-added image
  6. On the System Basic Setup page, click the LAN Setup link on the top menu.  The LAN Settings page will appear.

    User-added image

     
  7. On the LAN Settings page, click the Client List link on the left-hand menu.  The Client List page will appear. 

    User-added image

     
  8. On the Client List page, copy the client's IP Address under Attached Client List section to use for the Port Forwarding setup.

    NOTE: The client may not be powered on or connect to the network if it's not found on the list.
     
    User-added image

     
  9. Click the Firewall link on the top menu.  The Firewall Settings page will appear.

    User-added image

     
  10. On the Firewall Settings page, click the Virtual Server / Port Forwarding link on the left-hand menu.  The Virtual Server / Port Forwarding page will appear. 

    User-added image

     
  11. On the Virtual Servers/ Port Forwarding page, click the Add button.  The Add Virtual Server pop-up box will appear.

    User-added image

     
  12. On the Add Virtual Server pop-up box, enter a name of the service in the Description field.
     
  13. Enter the desired port number into both the Inbound Port fields. 

    NOTE:  When forwarding a range of ports, enter the start and end of the port range in the two fields.

     
  14. Click the Format drop-down menu and select the appropriate protocol (TCP, UDP, or Both).
     
  15. Enter the client's IP address into the Private IP Address field.
     
  16. Enter the same port numbers that were entered for Inbound Port in the Local Port fields.
     
  17. Click the Add Virtual Server button.  The Virtual Server / Port Forwarding page will appear.

    User-added image

     
  18. On the Virtual Servers / Port Forwarding page, the port forward entry will appear as shown.  Repeat steps 10 - 16 to forward additional ports.

    NOTE: Changes take effect immediately and a restart is not required.

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->